 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN2057B Monolithic Linear IC LA5316M Variable Divided Voltage Generator for LCD Overview The LA5316M is a variable divided voltage generator IC for multiple drive of LCD matrix. Package Dimensions unit:mm 3036B-MFP20 [LA5316M] 20 11 Features * Power supply for variable bias LCD drive (1/5 to 1/13 bias available by on-chip resistances). * 5 operational amplifiers to deliver 5 voltage outputs. * Low current drain (1.5mA max). * Miniflat package. * On-chip variable voltage regulator for VREF. 6.35 0.15 0.625 1 12.6 10 1.8 max 0.35 1.27 0.59 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Maximum supply voltage Maximum output current Allowable power dissipation Operating temperature Storage temperature Symbol VCC max IOUT max Pd max Topr Tstg GND-VCC V1, V2, V3, V4, V5 Conditions 0.1 1.5 Ratings -35 to 0 15 370 -20 to +75 -30 to +125 5.4 SANYO : MFP20 7.6 Unit V mA mW C C Operating Conditions at Ta = 25C Parameter Supply voltage Recommended input voltage Recommended input current Symbol VCC op VREF IIN IOUT1 IOUT2, 3 IOUT4, 5 Conditions GND-VCC : (When V1>-1V, IIN is needed.) * GND-VREF : VREF VCC * VIN : V1>-1V, current source of IIN : 1V or greater relative to GND V1 V2, V3 V4, V5 Ratings -30 to -10 -30 to -6 0.2 to 3 -0.1 to +5 -5 to +5 -10 to +0.1 Unit V V mA mA mA mA Recommended output current note * Set VCC, VREF so that | V2 |, | VCC-V5 | become 1V or greater. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 31500TN (KT)/11795TH (KOTO)/6267KI/6246KI, TS No.2057-1/6 LA5316M Operating Characteristics at Ta = 25C, VCC=-16V Parameter Current drain Output voltage ratio 1 Output voltage ratio 2 Output voltage ratio 3 Output voltage ratio 4 Output voltage ratio 5 Output voltage ratio 6 Internal resistance ratio 1 Internal resistance ratio 2 Internal resistance ratio 3 Internal resistance ratio 4 Internal resistance ratio 5 Internal resistance ratio 6 Resistance Load regulation 1 Load regulation 2 Load regulation 3 Load regulation 4 Load regulation 5 Load regulation 6 Load regulation 7 Regulator voltage VReg load regulation Symbol ICC Ra1 Ra2 Rb1 Rb2 Rb3 Rb4 4R 5R 6R 7R 8R 9R R V1 V2 V3 -V2 -V3 -V4 -V5 VReg VReg Conditions VIN, GND-VCC, VREF : VCC=VREF=-16V, VIN=GND, RX=5R V2/V1, Vref=-12V, VCC=-16V, 1/9 bias (RX=5R) (V5-V3)/(V5-V4), Vref=-12V, VCC=-16V, 1/9 bias (RX=5R) V5/V1, Vref=-12V, VCC=-16V, 1/9 bias (RX=5R) V5/V2, Vref=-12V, VCC=-16V, 1/9 bias (RX=5R) V5/(V5-V3), Vref=-12V, VCC=-16V, 1/9 bias (RX=5R) V5/(V5-V4), Vref=-12V, VCC=-16V, 1/9 bias (RX=5R) 1.96 1.96 8.73 4.37 4.37 8.73 2.00 2.00 9.00 4.50 4.50 9.00 4 5 6 7 8 9 20 20 20 20 20 20 20 20 -6.5 -6.2 -5.9 50 k mV mV mV mV mV mV mV V mV Ratings min typ max 1.5 2.04 2.04 9.27 4.63 4.63 9.27 Unit mA VIN3-RX1, Resistance ratio referenced to R across pins fi and fl VIN3-RX2, Resistance ratio referenced to R across pins fi and fl VIN3-RX3, Resistance ratio referenced to R across pins fi and fl VIN3-RX4, Resistance ratio referenced to R across pins fi and fl VIN3-RX5, Resistance ratio referenced to R across pins fi and fl VIN3-RX6, Resistance ratio referenced to R across pins fi and fl RX1-RX2 : R value when 0.5V is applied across pins fi and fl V1 : +100A VReg : -5mA LA5316M Pin Functions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pin Name RX6 RX5 RX4 RX3 RX2 RX1 VReg VR VIN3 VIN2 VIN GND V1 V2 V3 V4 V5 VCC VIN5 VREF RX pin RX pin RX pin RX pin RX pin RX pin VReg output VReg operational amplifier VIN- V3 input V2 input V1 supply (+ supply) GND V1 output V2 output V3 output V4 output V5 output VCC supply (-supply) V5 input VREF supply (-supply) When V1 > -1.0V, VIN is applied. When V1 < -1.0V, this pin is shorted to GND. Description Remarks Pin shorted RX=9R Pin shorted RX=8R Pin shorted RX=7R Pin shorted RX=6R Pin shorted RX=5R Pin shorted RX=4R For supplying VREF Note ) Do not use the NC pin. Pin Assingment No.2057-3/6 LA5316M Equivalent Circuit Block Diagram No.2057-4/6 LA5316M No.2057-5/6 LA5316M Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2000. Specifications and information herein are subject to change without notice. PS No.2057-6/6 |
Price & Availability of LA5316M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |